The BLADE High Efficiency Gas Fire has been created with both style and energy saving in mind. The fire incorporates a unique gas burner with a floating ribbon of flame in the style of a blade. This contemporary wall mounted 4.6kw fireplace has a class 1 efficiency rating meaning most of the heat generated is returned to the room, keeping utility bills low. The fire is operated by a manual control which is hidden behind the fascia. The fire is suitable for installation into any home with a chimney As this is a room sealed appliance no ventilation is required.
The fire is suitable for any home with an existing chimney or can be used in a new build with the optional flue box and a flue liner. Choose from black satin or stainless finishes. The fire is approved with a shelf above which will allow for a TV to be installed above if desired [with careful planning]. As this is a glass fronted fire there is no need for additional room ventilation. The fire is supplied with ceramic pebbles.
"By installing a CVO High Efficiency Gas Fire a Customer reduced their overall gas bill by 46% saving £170 between January and April 2013. Ask about how to lower your utility bills with a modern gas fire design from CVO"
Options Available at Checkout
Fascia: The fascia is available in either Satin Black or Stainless Steel.
Control: The standard fire is manually operated with a control behind the fascia. There is a remote upgrade is available with a handset and a manual switch inside the fire. The magic eye is below the fascia. The remote version uses batteries or mains power.
Flue Box: There is a standard flue box which makes installation easier, it also includes a spigot to join the fire to a flue liner. Please ask for the drawings.
Please review the PDF specification sheet before buying.
|Fuel Type||Natural Gas Only|
|Appliance Type||High Efficiency, Glass Fronted, Wall Mounted Chimney Fire|
|Control System||Manual Control as Standard - IR Remote Control with handset and switch optional.|
|Countries||All European Countries.|
|Heat Input (kW)||4.6kW (High) 2.4kW (Low)|
|Heat Output (kW)||3.9kW (High) 2.0kW (Low)|
|Running Costs||20p/hour (On High), 10p/hour (On Low)|
|Flue System Required||Class 1, Class 2, Pre-Cast, Flue Liner.|
|Air Vent Required||No Vent Required.|
|Specification Sheet (PDF) #1||PDF Specification Sheet - click here|
|Specification Sheet (PDF) #2||No|
|Specification Sheet (PDF) #3||No|
|Specification Sheet (PDF) #4||No|
|Installation By||Gas Safe Registered Engineer|
|Special Comments||Please read the full technical PDF as shown above as it gives extra information required for installation. There is also a technical image and video available by using the tabs above. If in doubt about any aspect of this fire please call our technical sales team on 01325-301020 during office hours or email using the contact button below. Note this fire is available for Natural gas Only.|