Our office will be closed for its annual Christmas break, 1pm 23rd December and resume operations 8:30am 3rd January.
Please Note our office and showroom will close for annual Christmas break at 1pm 23rd December and will resume operations 8:30am 3rd January.
Spirit Fires Ltd owns the CVO Fire, Spirit, FireVault and EasyFire brands (registered in the UK, 06115228)
The ESSENCE"hole-in-the-wall" fireplace has been designed to suit homes where a smaller feature fireplace is required. The Essence uses our award winning ribbon gas burner technology with a beautiful dancing ribbon of flame. The fire is designed with minimal depth, 318mm, and can be installed in most properties with a chimney or by using a flue liner. The 5.7kw Essence has a beautiful flame and will provide a practical source of heat for a room. The fireplace has an opening size of 518mm x 265mm. See technical drawing for full dimensions.
Unique Technology - Thermostatic Remote Control : This fire is operated by a thermostatic remote control built into the handset. The digital handset can be set to the desired room temperature. Once set the handset will monitor the room temperature and adjust the flame up or down to keep the room at a steady temperature. this saves money and reduces energy use and gas bills.
The fire is supplied as a complete package including Ribbon Gas Burner, Enclosure, Remote Control System and Fascia Trim. Please read the technical information prior to ordering.
Options (available at checkout):
- Enclosure: Choose from Satin Black, Polished or Stainless Steel.
- Fascia: Choose from Satin Black or Stainless Steel.
- Gather: The gather is specially designed to link the enclosure to a flue liner and has a 125mm spigot. We strongly advise buying the gather even if the fire is to be fitted into a brick built chimney. The gather will prevent debris falling into the opening from the chimney, stabilise the flame and maximise the efficiency.
- Power Supply: The fire is operated by battery power supply, 5 x AA.
|Fuel Type||Natural gas or LPG/Propane (select at checkout)|
|Appliance Type||Open Flame Gas Fire, suitable for all chimney types.|
|Control System||Thermostatic Remote Control. Operated by RF, handset with display.|
|Countries||AT, BE, CH, CZ, DE, DK, ES, FI, FR, GB, GR, IE, IT, LU, MT, NL, NO, PT, SE,|
|Efficiency Rating||Approx 50% (Depends on chimney draw and if a gather has been used)|
|Heat Input (kW)||5.7Kw (Natural Gas)|
|Heat Output (kW)||2.9Kw (Natural Gas)|
|Running Costs||12p to 25p/hour (Low to High Setting) (Based on Natural Gas @ 4.3p/kW/hr)|
|Flue System Required||Chimney or 127mm flue liner, minimum distance 3m|
|Air Vent Required||No vent required.|
|Specification Sheet (PDF) #1||PDF Specification Sheet - click here|
|Specification Sheet (PDF) #2||Ribbon Selector Chart - click here|
|Specification Sheet (PDF) #3||No|
|Specification Sheet (PDF) #4||No|
|Installation By||Gas Safe Registered Engineer|
|Special Comments||Please read technical PDF in full as it gives extra information required for installation. If in doubt about any aspect of this fire please call our technical sales team on 01325-301020 during office hours or email using the contact button below.|