The BONITA traditional style flueless gas fire features our award winning flueless gas fire technology with the addition of a solid wood surround and a black granite hearth. This flueless fire is the ideal solution for homes without a chimney where an open flamed fireplace is required with a traditional styling. The flueless fire is supplied as a complete set ready for installation: Open flamed flueless gas fire with stone fascia, wooden fireplace surround, black granite hearth and black satin backing plate. It's time to remove that old inset fire and benefit from 99.9% energy efficiency. The surround is made from solid natural wood (not veneered like many on the market)
The BONITA flueless fireplace is not only a contemporary gas fireplace and a practical source of heat that will warm up a room nicely. Typical Running Costs on Natural Gas are 9p/Hour (annual cost typically £60/year). Compared to a conventional gas fire with the same heat output into the room (the heat you benefit from) this represents a saving of 70% on running costs. The BONITA flueless fire suite is 99.9% energy efficient and does not require a chimney to operate. This makes your central heating system more efficient as there is no chimney to remove the heat from the room, meaning all the heat you pay for stays in your property; saving you money. There are two power setting to choose from 2.7Kw or 3.5Kw and the fire can be supplied for Natural Gas or LPG. Designed to comply with the latest CE standards the flueless gas fire has safety devices fitted meaning it will shut down if the air vent is blocked. The fire is also non-adjustable giving you peace of mind.
Options Available at Checkout
Fascia: 4pc Cut stone in ether Rigel, Limestone or Black Granite.
Power Rating: There are two power ratings, 2.7kW and 3.5kW for Natural Gas and 3.5kW only for LPG. Each power rating requires a different sized air vent and minimum room size. Please read the technical specification or call if you are unsure. If your room is smaller than 100m3 we advise buying the 2.7kW version.
Air Vent: The air vent is shown with a 30% discount when purchased with the fire (RRP £45.71), if sold separately the RRP will be applied plus a shipping charge. It is advised to buy the air vent with the flueless fire as this will ensure a correct installation.
If using this fire to replace an existing surround and hearth set up with a chimney, the original chimney must be blocked up and void sealed before the flueless fire is installed. Failure to do this will result in damage to the new fireplace.
- Tech A
Saving No Manufacturer CVO FIRE Fuel Type Natural Gas or LPG/Propane (select at checkout) Appliance Type Flueless Gas Fire (No Chimney or External Required) Control System Piezo Manual Ignition Control with High to Low Adjustment. Countries AT, BE, CH, CZ, CY, DE, DK, ES, FI, FR, GB, GR, IE, IT, LU, MT, NL, NO, PT, SE, Efficiency Rating 100% (No Heat Loss) Heat Input (kW) Two Versions to Choose - 2.7kW or 3.5kW (Natural Gas) or 3.5kW (LPG) Heat Output (kW) 2.7kw/2.0kW or 3.5kW/2.7kW (High/Low) Running Costs 11.6p/hour (2.7kW) or 15.0p(3.5kW) (Based on Natural Gas @ 4.3p/kW/hr) Flue System Required No Air Vent Required The 2.7kW needs a 100cm2 Air Vent the 3.5kW needs a 125cm2. Specification Sheet (PDF) #1 Bonita PDF Specification Sheet - click here Specification Sheet (PDF) #2 No Specification Sheet (PDF) #3 No Specification Sheet (PDF) #4 No Installation By Gas Safe Registered Engineer Dimensions No Special Comments Please read the technical PDF in full for the various versions on the fires and if in any doubt please call us before ordering. The specification sheet also gives extra information required for installation. For additional help please call our technical sales team on 01325-301020 during office hours or email using the contact button below.
- Tech B
- Related Products