The BORDINO "Hole-in-the-Wall" gas fireplace with a floating shelf features our dancing flame ribbon gas burner. The 5.7Kw gas fire is designed with minimum depth of only 318mm allowing installation into most properties. The fire does not need an air vent in the room and can be used with any chimney or flue liner system. To ensure easy installation the fire is supplied as a package with gas burner, remote control, steel enclosure, stone lining. There is also an optional gather.
Unique Technology - Thermostatic Remote Control : This fire is operated by a thermostatic remote control built into the handset. The digital handset can be set to the desired room temperature. Once set the handset will monitor the room temperature and adjust the flame up or down to keep the room at a steady temperature. this saves money and reduces energy use and gas bills.
"A Beautiful Hole in the Wall Gas Fireplace"
Options (available at checkout):
Enclosure & Shelf: Choose from African Black Granite, Travertine or Rigel Cream stone.
Gather: The gather is specially designed to link the enclosure to a flue liner and has a 125mm spigot. We strongly advise buying the gather even if the fire is to be fitted into a brick built chimney. The gather will prevent debris falling into the opening from the chimney, stabilise the flame and maximise the efficiency.
Power Supply: The fire is operated by batteries (AA) and these should last between 12 and 24 months with normal use.
Fire Ribbon® is a registered trademark belonging to Spirit Fires Limited.
- Tech A
Saving No Manufacturer CVO FIRE Fuel Type Natural gas or LPG/Propane (select at checkout) Appliance Type Chimney Fire with Open Flame Control System Remote Control, Fully Sequential, Operated by Hand Set, Controls On & Off and Flame Up & Down. 6 x AA Battery, Upgrade to 240v available. Countries AT, BE, CH, CZ, DE, DK, ES, FI, FR, GB, GR, IE, IT, LU, MT, NL, NO, PT, SE, Efficiency Rating Approx 50% (Depends on chimney draw and if a gather has been used) Heat Input (kW) 6.8kW (Natural Gas) Heat Output (kW) 3.4kW (Natural Gas) Running Costs 29p/hour (High Setting) (Based on Natural Gas @ 4.3p/kW/hr) Flue System Required Minimum: 127mm x 2m or conventional Class 2, Class 1 or brick built chimney. Air Vent Required No Air Vent Required Specification Sheet (PDF) #1 PDF Specification Sheet - click here Specification Sheet (PDF) #2 Ribbon Selector Chart - click here Specification Sheet (PDF) #3 No Specification Sheet (PDF) #4 No Installation By Gas Safe Registered Engineer Dimensions No Special Comments Please read technical PDF in full as it gives extra information required for installation. If in doubt about any aspect of this fire please call our technical sales team on 01325-301020 during office hours or email using the contact button below.
- Tech B
- Related Products