The FR1200 Ribbon Fire is part of our Spirit range of gas fires. The 10Kw gas burner has a dancing ribbon of flame. The FR1200 ribbon gas fire has minimal depth and is available with a black interior and either logs or pebbles. The fire is operated by an RF remote system with a handset. The remote is programmable and includes a thermostat to control room temperature. The FR1200 is CE approved for Natural Gas and is available for UK, Ireland and all other European Countries. This modern ribbon gas fire can be used with either a class 1 brick built chimney or with a 175mm flue liner or larger. The fire has minimal depth allowing it to be installed in most properties. See technical drawings for dimensions and installation information. To discuss the installation in detail call sales on 01325-301020.
BURNER: The gas burner is currently for natural gas + LPG.
POWER RATING: Natural Gas: 10Kw [45P per hour (ON FULL)], Flow Rate: 1.0m3/Hour
DIMENSIONS: See attached technical PDF specification. Letterbox (opening) size: 1200mm x 270mm. Depth 315mm.
OTHER TECHNICAL INFORMATION:
- CERAMICS: Choose from either a clean ribbon of flame, logs or pebbles.
- IGNITION: The fire is operated by a RF (radio frequency) battery powered remote system with handset. The batteries have a life of 12 months or greater depending on usage. High quality batteries should be used. The handset shows the condition of the batteries in the handset and also the fire. The remote includes a thermostat to regulate the room temperature.
- CHIMNEY or FLUE SYSTEM:
- The minimum requirement is a 175mm x 3.0m length flue liner; the fire can also be fitted into a class1 or precast chimney which meets the minimum requirements. The fire has minimum depth so will fit most existing chimneys.
- The fire is supplied with a gather fitted. This must be used.
- PIPE WORK:
- The fire has a power rating of 10Kw and requires an 8mm gas inlet.
- The flow rate on full is 1.5m3 per hour, the pipework to the fire must be capable of supplying a steady inlet pressure and should be routed using at least 28mm pipes reducing to 8mm at the fire.
- The pipework should be routed to ensure no pressure drop when other gas appliances in the home are being used.
- GLASS: There is a small glass slip at the top of the enclosure, this is fitted at the factory and is required for the fire to function safely.
- SAFETY: Tested to the latest CE safety standard. Fitted with ODS (Oxygen Depletion System) safety system which monitors oxygen levels in the room and shuts off the fire should the chimney be blocked. o It is advised that when operating the appliance in a room where children or elderly people will be present that a fireguard should be used. These are available from our web store.
- VENTILATION : The fire requires an air vent which can supply a minimum of 100cm2 air. We can supply a high quality air vent with the fire. Our air vents have baffles and a draft cowl to ensure that they provide air only. Ask for details.
- Tech A
Saving No Manufacturer SPIRIT FIRE Fuel Type Natural Gas (All European Countries) + LPG Appliance Type Chimney Fire with Ribbon of Flame Control System RF Remote Control with Thermostat. Operated by Hand Set. (Uses AA batteries). Countries AT, BE, CH, CZ, DE, DK, ES, FI, FR, GB, GR, IE, IT, LU, MT, NL, NO, PT, SE, Efficiency Rating 50% Heat Input (kW) 10Kw High, 6Kw Low Heat Output (kW) 5Kw, 3Kw Low Running Costs 45p to 27p per hour (Low to High Setting) (Based on Natural Gas @ 4.5p/kW/hr) Flue System Required Minimum: Natural Gas 175mm x 3.0m or conventional Class 1 brick built chimney. Air Vent Required 100cm2 Free Air Required Specification Sheet (PDF) #1 PDF Specification Sheet - click here Specification Sheet (PDF) #2 No Specification Sheet (PDF) #3 No Specification Sheet (PDF) #4 No Installation By Gas Safe Registered Engineer Dimensions No Special Comments Please read technical PDF in full as it gives extra information required for installation. If in doubt about any aspect of this fire or how it is installed please call our technical sales team on 01325-301020 during office hours or email using the contact button below.
- Related Products