The ANGEL 1110 Stainless open flame flueless gas fire is equally at home in a modern or traditional home. Easy to install, this unique no chimney flueless gas fire design has won awards for style and technology. Available for either Natural Gas or LPG/Calor Gas, this 100% energy efficient flueless fireplace does not require a chimney and can be installed on any wall within a room. Using our unique CE approved flueless gas burner with very low emissions which allows us to sell a flueless gas fire without catalytic filters or a glass screen, leaving a beautiful open living flame. As this is a 100% energy efficient gas fireplace all the gas used is turned into heat and that means lower gas bills. Running costs start from only 11p/hour. The flueless fire was featured on Grand Designs as part of a new home make over where a modern flueless gas fire was required. At the checkout you can choose from either 2.7Kw or 3.5kw heat outputs, add a high quality, anti-draft air vent and a deflector gather. The deflector gather is require to allow a shelf to be put above the flueless fire, and if desired a TV above that.
Other Sizes and Finishes are available:
"Open Flame? No other flueless gas fire has the same flame quality as a CVO" Our flueless gas fire has won many awards and has featured on TV on Grand Designs and The Homes Show. The Angel is one of the slimmest flueless gas fires on the market at only 150mm projection from the wall. The fire is easy to install, requiring only a gas supply and an air vent within the room to operate.
Request a Flueless Gas Fire Brochure
- Natural Gas or LPG.
- 2.7kW or 3.5Kw Heat Output.
- 1110mm Stainless Steel Fascia.
- Flueless Gas Fire (No Chimney)
- 100% Energy Efficient.
- 2.7Kw requires 100cm2 Air Vent, 3.5Kw requires 125cm2 Air Vent.
- Air vent must be 1m or greater away from the gas fire.
- Room Size, 30m3 or greater, 3.5Kw = 40m3 or greater.
- Tech A
Saving No Manufacturer SPIRIT FIRE Fuel Type Natural Gas or LPG/Propane (select at checkout) Appliance Type Flueless Gas Fire Control System Piezo Manual Ignition Control with High to Low Adjustment. Countries AT, BE, CH, CZ, CY, DE, DK, ES, FI, FR, GB, GR, IE, IT, LU, MT, NL, NO, PT, SE, Efficiency Rating 100% (No Heat Loss) Heat Input (kW) Two Versions to Choose - 2.7kW or 3.5kW (Natural Gas) or 3.5kW (LPG) Heat Output (kW) 2.7kw/2.0kW or 3.5kW/2.7kW (High/Low) Running Costs 11.6p/hour (2.7kW) or 15.0p(3.5kW) (Based on Natural Gas @ 4.3p/kW/hr) Flue System Required No Chimney Required Air Vent Required The 2.7kW needs a 100cm2 Air Vent the 3.5kW needs a 125cm2. Specification Sheet (PDF) #1 1110mm Version PDF Specification Sheet - click here Specification Sheet (PDF) #2 No Specification Sheet (PDF) #3 No Specification Sheet (PDF) #4 No Installation By Gas Safe Registered Engineer Dimensions No Special Comments Please read the technical PDF in full for the various versions on the fires and if in any doubt please call us before ordering. The specification sheet also gives extra information required for installation. For additional help please call our technical sales team on 01325-301020 during office hours or email using the contact button below.
- Tech B
The technical drawing shows the dimensions of both the 840mm and 1110mm versions. Please also review the technical specification PDF.
- Related Products
Customer Reviews 1 item(s)
- Premuim Quality
Fire was easy to install with little mess. Very pleased overall.
Quality Price Description